Solar Power System Stacking use On Grid Tied Power Inverter 1200 W
SP 1200W Series Using IP65 waterproof streamline design, Can effectively high performance Maximum Power Point Tracking(MPPT)Function,Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, the inverter output power can provide load priority use Extra electricity to the grid, efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%.
Lobel Solar System Block Diagram & Application
In order to achieve higher power, we can use this inverters in stack. For example: 10 pcs ofSPMG1200 1200W grid tie inverters used in stack can achieve 12KW.
And the stacking number is unlimited.
Easy Installation
Single-phase electrical schematics
Three Phase electrical schematics
Notes:
1. Please install the inverters according to the user manual and connect the ground safety
2. Forbid openning the shell with nonprofessional person, only qualified maintenance person can repair the product.
3. The inverter should be installed in the low humidity and well ventilated place, and remove the flammable things surrounding the inverter for avoiding overheating.
4. Avoid children play when the inverter is working.
5. Ensure the DC input and AC output when connect with PV.
6. The Vmp and Voc of PV should be fit for the Inverter MPPT input voltage forget output max
Why is the use of micro-inverter?
1. The transition from a centralized to a distributed inverter optimizes energy collection.
2. The converter module integrated into the solar panels can reduce installation costs.
3. By reducing the temperature of the converter and remove the fan,
you can enhance system reliability from 5 years to 20 years.
4. Soft switch technology to replace hardswitching technology can improve efficiency and reduce
heat dissipation
5. From cottage industry to mass production, standardized design (hardware and software) to improve reliability and reduce costs.
6. Using a special capacitor (due to the high failure rate). Design requires a higher voltage to reduce the current, we use a special electrolytic capacitors.
7. The converter can be connected to the grid to eliminate the need for many battery applications.
The high price of batteries, require maintenance, life expectancy is shorter.
8. Work required microinverter power increasingly smaller (only a few hundred watts),
which can reduce the internal temperature and improve reliability.
9. Microinverter solar inverter system needs to deal with a lot of a particular power level,
in order to increase production, thereby reducing costs.
