New LOBEL Integrated Solar led Street Light is an extremely versatile and robust solar parking lot light, it is perfect for all kind of weather conditions. Here our own Production of this integrated solar light. This compact solar powered street light provides extra lighting easily in no time. Installation is straightforward; only 4 bolts need to be tightened onto a pole (pole not included). The unit can also be wall mounted. No trenching or connection to the electric grid is needed.
The all-in-one LED solar street light is perfect for retrofitting old electric powered fixture or new installations.
Benefits
-No line voltage, trenching, or metering
-No power outages
-Battery backup for cloudy or rainy days
-Distributed light and power no single point of failure for enhanced security
-Easy to install with quick connect plugs – less than 1 hour
-No scheduled maintenance for up to five years
-No cost of replacing concrete, asphalt or landscaping
-No cost of transformers or meters to be added for electric service
-Qualify for savings from various state and federal taxes and incentiveses
-No monthly electric bills
-Controlled charging to prolong battery service life
-Long-life PV modules with more than 25 years of power generation capacity
-Environmentally friendly – 100% powered by the sun, solar panels reduce fossil fuel consumption, eliminating pollution
-Self-contained solution – Light on/off controlled by automatic daylight sensing or hour preset, no running or maintenance cost
-Better light source – LED lights feature cool white light without flickering and higher brightness than sodium lights
-Safe 12 volt / 24 volt circuit, no risk of electric shock
3. WATER TEMPERATURE
It should ideally be the same as the solar panel temperature. The different of temperature is not acceptable more than 25 degrees.
Greater difference between the water and the solar panel may be cracking glass of solar panel due to thermal shock.
4. TIMING OF WASHING
“Aftersunset and or before sunrise”
Best time of washing is early morning (7 to 9 AM) or evening (6 to 8 PM). At this time production is low.
5. STAINS REMOVER – Never Use an Abrasive Material to Clean the Solar Panels
Best is Rinse the module subsequently with soft and sufficient amount of water.
If you use minimal of water which create stains and if you try to remove it than it will damages the Anti-Reflective Coating on the glass of the panel.
“Usea Soft Brush or a Sponge”
6. BACK SIDE OF PANEL
First of all it is not require routine cleaning.
Cleaning of dust only use soft sponge or micro-fiber cloth without any sharp tool which can damage the solar panel back sheet.
